The Controls - Indesit HOTPOINT LUCE DX1032CX Service Manual

Indesit Company
There is no preheating stage for the GRILL mode.
Never put objects directly on the bottom of the oven; this will prevent the enamel coating from being
damaged.
Always place cookware on the rack(s) provided.
If the oven is in Auto Cook or Demo mode, to switch the oven off, press and hold the On/Off button.
the display will coult down from 3 seconds.
Cooling Ventilation
In order to cool down the external temperature of the oven, a cooling fan blows a stream of air
between the control panel and the oven door, as well as towards the bottom of the oven door.
Once cooking has been completed, the cooling fan continues to operate until the oven has cooled
down sufficiently.
Oven Light
The light comes on when the oven door is opened or when a cooking mode starts. The button can
be used to switch on/switch off the light at any time.
Residual Heat Indicators
The appliance is fitted with a residual heat indicator.
When the oven is off, the 'residual heat' bar on the display lights up to indicate high temperatures
inside the oven cavity. The individual segments of the bar switch off one by one as the temperature
inside the oven falls.
Demo Mode
The oven can operate in the DEMO mode: all heating elements are deactivated, and the controls
remain operative.
To activate DEMO mode, press and release button , then buttons + and - simultaneously for 6
seconds. A beep will confirm your selection. Press the button and the message deOn' will
appear.
To deactivate DEMO mode, when the oven is off press and hold button and button '-'
simultaneously for 3 seconds. A beep sounds to confirm the selection and the 'dOFF' message
disappears from the display.
Restoring the Factory Settings
The oven factory settings can be restored to reset all selections made by the user (clock and
customised durations). To carry out a reset, switch off the oven, then press and hold the button
corresponding to the first manual cooking mode (top left) and the button simultaneously for 6
seconds. Once the restore procedure is complete, a buzzer will sound.
The first time the button is pressed, the oven will behave as if it is being switched on for the first
time.
Stand-By
This product complies with the requirements of the latest European Directive on the limitation of
power consumption of the stand-by mode. If no buttons are pressed for 30 minutes and the control
panel lock has not been activated, the appliance automatically reverts to stand-by mode.
Stand-by mode is indicated by the high luminosity 'Clock button' light. As soon as interaction with
the machine resumes, the systems operating mode is restored.
Service Manual UK English
15 of 39