Advertisement
• Make small adjustments to front feet where necessary.
• Check that the product is stable (all 4 feet are on the floor). If not, repeat 9A and 9B.
Before Placing Food in the Fresh Food or Freezer Compartments
• Remove all internal packaging. Ensure that all transit clips are removed from the refrigerator. These are small
rubber stoppers located at the back of the shelves.
• Clean the inside of the appliance with a mix of warm water and a small amount of liquid detergent, and a soft
cloth to remove manufacturing and transportation dust.
• Allow the refrigerator and freezer to run empty for 2 – 3 hours to allow each compartment to cool to the
appropriate temperature.
• The appliance may have an odor on its initial operation, but this will go when the refrigerator and freezer have
cooled sufficiently.
Energy Efficiency
For the Most Energy Efficient use of Your Appliance
• Ensure your refrigerator has adequate ventilation.
• Do not cover your appliance with any material that will prevent air from flowing around the cabinet sides.
• Ensure you vacuum around the appliance to remove dust and possible pet hair accumulation. Also keep the
appliance and it's cabinetry free of dust by wiping down with a dry, lint-free cloth (refer to section 'Cleaning and
caring for your refrigerator', 'Rear compartment cover').
• Allow good clearances in front of air ducts within the cabinet for maximum cold air distribution.
• Cool hot foods down before placing them in the appliance.
• Do not overfill the compartments.
• Keep door openings to a minimum.
• Select a temperature setting that isn't too cold.
• Check your door seals for leaks.
https://producthelp.fisherpaykel.com/us/Cool/Fridges/Bottom_Freezer/Without_Ice_and_Water/13.5_cu_ft/RF135BDRX4/User...
Updated: Tue, 02 Jun 2020 23:55:17 GMT
Powered by
21
Advertisement
