Energy Efficiency - Fisher & Paykel RF523G Installation Instructions Manual

Hide thumbs Also See for RF523G:

Before Placing Food in the Fresh Food or Freezer Compartments

• Remove all internal packaging. Ensure that all transit clips are removed from the refrigerator. These are small

rubber stoppers located at the back of the shelves.

• Clean the inside of the appliance with a mix of warm water and a small amount of liquid detergent. Use a soft

cloth to remove dust collected during manufacture and transport.

• Allow the refrigerator and freezer to run empty for 2 – 3 hours to allow each compartment to cool to the

appropriate temperature.

• The appliance may have an odour on its initial operation, this will go when the refrigerator and freezer have

cooled sufficiently.

Energy Efficiency

For the most energy efficient use of your appliance:

• Ensure your refrigerator has adequate ventilation.

• Do not cover your appliance with any material that will prevent air from flowing around the cabinet sides.

• Ensure you vacuum around the appliance to remove dust and accumulated debris. Keep the appliance and it's

cabinetry free of dust by wiping down with a dry, lint-free cloth (refer to section 'Cleaning and caring for your

refrigerator').

• Allow good clearances in front of air ducts within the cabinet for maximum cold air distribution.

• Cool down hot foods before placing them in the appliance.

• Do not overfill the compartments.

• Keep door openings to a minimum.

• Select a temperature setting that isn't too cold.

• Check your door seals for leaks.

https://producthelp.fisherpaykel.com/nz/Cool/French_Door/With_Ice_and_Water/790mm/RF523GDUX1/User_Guide_RF523G...

Updated: Sat, 15 Feb 2020 14:47:14 GMT

Table of Contents

Rf523m