Advertisement
Please note that once installation is complete a few drips may appear out of the dispenser over the
next few days as the remaining trapped air is cleared.
Installation (all models)
Your Fisher & Paykel ActiveSmartTM
refrigerator is fitted with front and rear rollers,
designed for moving the product in the
forwards and backwards direction.
Avoid moving the product in a sideways
direction as this may damage the rollers or the
floor covering/surface.
A. Your refrigerator will arrive with the
front feet wound up making moving
the product into its final location a
simple task.
B. Roll the refrigerator into its final
position making sure there is the
correct air gap between the product
and surrounding cabinetry. See
minimum clearance in cabinetry
dimensions table.
C. Adjust the front feet down until the
refrigerator
is leaning backward with the front
approximately 1⁄2" (10 mm) higher
than the back. This will ensure a good
door closing action.
Non French door models
only
D. Aligning your refrigerator with
cabinetry.
https://producthelp.fisherpaykel.com/us/Cool/Fridges/Bottom_Freezer/Without_Ice_and_Water/13.5_cu_ft/RF135BDRX4/User...
Refrigerator Feet
Updated: Tue, 02 Jun 2020 23:55:17 GMT
Powered by
18
Advertisement
