Detecto APEX-RI Owner's Manual page 26

Portable scale with remote indicator

Table of Contents

(Scale Model)

The display will show

press the

key. Otherwise, press the

(apex®) or

save it. You will be returned to the

This will change the default settings and operation of the scale. For instance, select

for type in order to use the stand-up type scale for the scale with the inline height rod or

sonar height rod.

Allowable settings are

NOTE: If your scale is the Model apex-RI-C, additional setup prompts will be shown

after selecting the

Proceed to the Model apex-RI-C section of this manual for guidance through setup

and operation of the Wi-Fi and Bluetooth (BLE) wireless transmitter features.

Otherwise, setup and calibration is complete.

Setup and Calibration is Complete

Now that setup and calibration has been completed, press the

then press it again to turn the scale back on. The scale is now ready for normal operation.

3300-0329-0M Rev C apex Portable Scale Owner's

SCALE SETUP, CONT.

and the current setting. If the value displayed is acceptable,

keys to toggle the Scale Model between

(custom, not applicable at this time), and then press the

prompt, the current Scale Capacity setting.

setting.

key to

key to turn the scale off, and

Table of Contents