Table of Contents
Advertisement
(SCALE CAPACITY)
The display will show
press the
key. Otherwise, press the
the
key to save it and proceed to the next prompt.
This is the maximum allowed weight of the scale. It should be set to 600.0.
(INTERVAL SETTING)
The display will show
press the
key. Otherwise, press the
the
key to save it and proceed to the next prompt.
This is the minimum graduation of the scale. Allowable settings are 1, 2, or 5.
(DECIMAL POINT POSITION)
The display will show
press the
key. Otherwise, press the
the
key to save it and proceed to the next prompt.
This is the decimal point precision of the scale. Allowable settings are 0, 1, 2, or 3.
0 = XXXXX
1= XXXX.X
(SAMPLE RATE)
The display will show
the
key. Otherwise, press the
key to save it and proceed to the next prompt.
This is the number of times per second the load cell is sampled. Allowable values are a
minimum of 1 sample per second to a maximum of 10 samples per second in one sample
per second intervals.
(DIGITAL FILTER MODE)
The display will show
press the
key. Otherwise, press the
the
key to save it and proceed to the next prompt.
This is the amount of digital filtering applied to the scale. Allowable settings are 0, 1, 2, or 3.
0 = Off
1 = Minimal
(MOTION RANGE)
The display will show
press the
key. Otherwise, press the
the
key to save it and proceed to the next prompt.
The motion range is the number of divisions of change permitted before indicating unstable
(the STABLE annunciator turns off). Allowable values are 1 to 10.
3300-0329-0M Rev C apex Portable Scale Owner's
SCALE SETUP, CONT.
and the current setting. If the value displayed is acceptable,
or
keys to select a new value and then press
and the current setting. If the value displayed is acceptable,
or
keys to select a new value and then press
and the current setting. If the value displayed is acceptable,
or
keys to select a new value and then press
2 = XXX.XX
3 = XX.XXX
and the current setting. If the value displayed is acceptable, press
or
keys to select a new value and then press the
and the current setting. If the value displayed is acceptable,
or
keys to select a new value, and then press
2 = Moderate
3 = Maximum
and the current setting. If the value displayed is acceptable,
or
keys to select a new value, and then press
15
Advertisement
Table of Contents
