Scanning; Setting The Scan Resume Behavior; F() Scanning - Yaesu VX-1R Manual

Vhf/uhf ultra-compact dual-band transceiver with wide band coverage
Hide thumbs Also See for VX-1R:
Table of Contents

Advertisement

Scanning
The VX-IR allows you to scan just the stored memo-
ries in a band, an entire band, or a selected portion of
a band. It pauses on signals encountered, so you can
talk to the station(s) on that frequency, if you like.
Scanning operation is basically the same in each of
the above modes. Before you begin, take a moment to
select the way you want the scanner to resume scan-
ning after it halts on a signal.
Setting the Scan Resume Behavior
Two Scan-Resume options are available:
• "5 Second Hold"
In this mode, the scanner pauses any signal for 5
seconds. Unless you push a key within that period,
scanning resumes even if a signal is still present.
• "Carrier Drop"
In this mode, the scanner pauses on a signal and
remains there until two seconds after the signal is
gone (the carrier drops because the station ceases
transmission), after which scanning resumes. In the
case of continuous signals like broadcasts, the scan-
ner remains paused indefinitely.
To select the Scan-Resume mode:
0
Hold
e
for
1
second to enter the SET mode.
D
Press~
or
IS
to select Menu Item #8 REc;u:1E.
D
Tum the Dial to select 5 c;f[ or [RRRE (Carrier
Drop), per above description.
D
Press
e
(or the PTT) momentarily to save the new
setting and exit to normal operation.
~ ~;;' R. F.
Says: The default scan resume setting is
~
5 )[[_
VFO Scanning
In this mode you can scan the entire operating band
(except the BC band).
D
Select the VFO mode by pressing
;~
if necessary.
D
Hold
~
or
IS
for I second to start scanning.
D
When the scanner encounters a signal strong
enough to open the squelch, scanning pauses and
the decimal point of the frequency display blinks.
D
Scanning then resumes according to the Scan
Resume mode selected in the previous section.
D
To stop scanning, press PTT or
El,
e.
~or~'.
,
~
/ R. F. Says: If you press
~
to start scanning,
~'P-
the VX-1 R scans upward. To change the scan
":iF1i7 direction, turn the Dial one click in the oppo-
site direction (in this case, counter-clockwise). You 'II
see the scanner turn around and scan downward.'

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents