Changing The Dial's Function; Disabling The Keypad Beeper - Yaesu VX-1R Manual

Changing the Dial's Function
Once you have the memories set up (see the follow-
ing sections), you may find it easier to use the
~
and
e keys for tuning, and the Dial for volume or
squelch control (without having to first press the ~
key). Here is how to do this:
D
Hold
e
for 1 second to enter the Menu mode.
0
Press
:i.
ore to select Menu Item #29 JJIRL M.
O
Tum the Dial to select VOL
I
5 [] (to use the Dial as
a combination Volume/Squelch control), or 1J I RL
(to use the Dial as a channel selector-the default).
D
Press
e
again to save the new setting and exit to
normal operation.
O
If you selected V GL
!
5 {] above, turning the Dial
causes the display to switch over to Volume level
indication. If you first press
'~
and then turn the
Dial, the Squelch level changes. In the
VOL 15{]
mode, all frequency control is performed using the
J;
and
el
keys.
Disabling the Keypad Beeper
If you are operating in a situation where the keypad
beep is undesirable, it can be disabled using the Menu
System:
0
Hold
e
for I second to enter the Menu mode.
0
Press~
or
a
to select Menu Item #10 1/EEP.
O
Turn the Dial to select OFF on the display.
D
Press
e
momentarily once more to save the new
setting and resume normal operation.