Ii-4-4 Basic Configuration Sync - Draytek VigorAP 802 User Manual

II-4-4 Basic Configuration Sync

This page can display current configuration of VigorAP device.
Available settings are explained as follows:
Item
System Maintenance /
Wireless LAN (2.4Hz) /
Wireless LAN (5GHz)
Tips for Mesh Network Setup
Set up TWO mesh devices with uplink RSSI larger than -65dBm.

Upgrade the firmware version of Mesh devices through Mesh link, starting from the mesh

device with less hop number. For example, upgrade the firmware from the root, hop1 Mesh
Node then hop2 Mesh Node, and so on.
VigorMesh network supports up to 3 hops of mesh devices. However, it is suggested to connect

the mesh group with less than or equals to 2 hops.
For your reference, we make a real mesh environment test and get the following record. (Use
VigorAP APP to do internet speed test with different hops mesh node.)
Internet Download Speed (for root and hop1 ~ hop3):
iPad connects to Root
iPad connects to hop1 Node : 49Mbps (Uplink RSSI : -55dBm)
iPad connects to hop2 Node : 41Mbps (Uplink RSSI : hop2 -64dBm / hop1 -55dBm)
iPad connects to hop3 Node : 26Mbps (Uplink RSSI : hop3 -62dBm / hop2 -68dBm / hop1
-55dBm)
Description
Check the item(s) you want to make configuration sync.
Apply – Click it to apply the settings configured by such AP to all
connected mesh node. Note that this button is available only
when such AP is in mesh root mode.
: 80Mbps
65