Unit Installation - C&H N Series Owner's Manual

N Series Floor Ceiling Type Unit

3.2 Unit Installation

3.2.1 Indoor Unit Installation
3.2.1.1 Preparation for Installing the Indoor Unit
(1) Dismantle the clasp in the left and right grille and take down the screws.
(2) Take down the fixed screws in the left and right side plate.
(3) Turn on the left and right side plate in arrow direction.
3.2.1.2 Indoor Unit Installation
(1) Determine t he l ocation of t he han ger t hrough t he p aper t emplate, and
then remove the paper template.
(2) Insert the anchor bolts into the drilled holes, and drive the pins completely
into the anchor bolts with a hammer.
(3) Remove the right and left side panels.
(4) Put the hanger bolt into the clasp of the indoor unit and tighten screws on
the hanger to prevent the indoor unit from moving.
(5) Reinstall and tighten the right and left side panels.
16