Table of Contents
Advertisement
At the end of the timed period an audible signal
sounds for up to 7 minutes.
To stop the sound press (
The display shows the time of day after a few
seconds and the bell symbol will go out. Fig.6.
3. HOW TO SET THE OVEN TIMER
CONTROL
A) TO SWITCH ON AND OFF
AUTOMATICALLY
i)
Ensure time of day is displayed.
ii)
Place food in oven.
iii) Set length of cooking time, press (-----)
button and within 5 seconds press the ( + )
button until the length of cooking time is
displayed. e.g. 2 hrs. 15 min. Fig.7.
The display shows the auto symbol and
cookpot are lit, then reverts to time of day
after a few seconds. Fig.8.
v)
Set the STOP time. Press the (
This shows the earliest possible end time.
Within 5 seconds press the (+) control until
the required stop time is displayed, e.g.
12.30. The display shows as Fig.9 then after
a few seconds the time of day shows in the
display as Fig.10.
Select Top or Main oven using the programmer
button.
If using the main oven, also select the fan or
conventional oven using the Main oven function
selector button.
NOTE.
When automatic cooking begins, the oven
indicator neon will illuminate and will cycle on and
off during cooking to show that the temperature is
being maintained.
If using the main oven, the function selector neon
(
) or (
) will illuminate.
4. RETURNING
MANUAL
OR
AUTOMATIC PROGRAMME.
At the end of the timed period, the oven will
switch off, an audible sound will be heard and the
Auto symbol will flash in the display.
To stop the sound and flashing press buttons
(
) and (
) together.
The display shows the time of day after a few
seconds. The cookpot symbol will be lit. The
oven will switch on again. Turn all oven controls
off, no indicator neons are illuminated.
) button.
) button.
THE
COOKER
TO
CANCEL
Fig.6
Fig.7
Fig.8
Fig.9
Fig.10
TO
AN
13
Advertisement
Table of Contents
