Bluetooth - Audio - Kenwood KDC-BT640U Instruction Manual

Bluetooth®
Bluetooth — Audio
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
Listen to the audio player via Bluetooth
1 Press B SRC repeatedly to select BT AUDIO.
• For : Pressing
2
Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
Random play
20
ENGLISH
enters BT AUDIO directly.
On the faceplate
Press 6 IW.
Press 2 / 1 .
Press S / T.
Press and hold S / T.
Press 4 repeatedly.
[ALL REPEAT], [FILE REPEAT], [GROUP REPEAT]*,
[REPEAT OFF]
Press and hold 3 to select [ALL RANDOM]
or [GROUP RANDOM]*.
• Press 3 to select [RANDOM OFF].
To
Select a file from a folder/list
Switch between connected
Bluetooth audio devices
* Depending on the connected device, some devices may not support this feature.
Operations and display indications may differ according to their availability
on the connected device.
Listen to iPod/iPhone via Bluetooth
You can listen to the songs on the iPod/iPhone via Bluetooth on this unit.
Press B SRC repeatedly to select iPod BT.
• You can operate the iPod/iPhone in the same way as iPod/iPhone via USB
input terminal. (Page 9)
• If you plug in an iPod/iPhone to the USB input terminal while listening to
iPod BT source, the source automatically changes to iPod USB source.
Press B SRC to select iPod BT source if the device is still connected via
Bluetooth.
On the faceplate
Refer to "Select a file to play" on page 10.
Press 5.
(Pressing the "Play" key on the connected
device itself also causes switching of sound
output from the device.)
(for )