Icon
Icon name
Description of product status
The scan is on and is in normal mode
The scan stays on priority channel 1
Scan icon
The scan stays on priority channel 2
The more bars, the more battery power
Battery power icon
Currently pointing to the main digital mode; press A/B
button to switch the main channel up and down.
D
When double-waiting is turned on and works in digital
sub-channel, the icon is
Pointer icon
Currently pointing to the main analog mode; press
A/B button to switch the main channel up and down.
A
When double-waiting is turned on and works in
analog sub-channel, the icon is
In channel mode, the current channel number is 001
Channel number
001
(range 001~128)
icon
LED Indicators
This product has LED indicators so you can easily grasp the current
operating state.
Indicator status
Red on
Product status
Transmitting
10
D
A
Green on
Green flash
Receiving
Scanning
Basic Operation
Power on/off
To turn on the power, turn the [Power Switch / Volume Control] knob
clockwise until you hear a "click" sound and a short beep sounds. To turn
off the radio, turn the knob counterclockwise until you hear a click.
If you disable the tone function of this product (setting path: "Menu ->
Settings -> Walkie talkie Settings -> Tones / Tips-> All Tones -> off"), there
will be no boot tone.
If all LED's are disabled, the transmit / receive light does not come on
during turning on. A short beep sounds to indicate successful boot
detection. (Setting path: "Menu-> Settings-> Walkie talkie Settings->
LED-> off"), the LED will not light up.
Adjusting Volume
After turning on, turn the [Power switch / volume control] knob clockwise
to increase the reception volume, and turn counterclockwise to reduce the
reception volume.
Dual Mode Switch
Dual band mode can be selected through the menu; the path is as follows:
1.Press [ MENU] to enter menu mode.
2.Press [
] / [
] to set, then press【MENU】to select.
3.Press [
] / [
] to the radio setting, then press【MENU】to select.
4.Press [
] / [
] to "Double Wait", then press【MENU】to select.
5.Press [
] / [
] to select the required option (Off/Double Wait/Single
Wait).
6.Press [MENU] return to theprevious menu.
11