Exhaust System - Echo PAS-225 Pro Attachment Series Manual

MAINTENANCE
6. Remove grass and leaves
from the grid between the
recoil starter and fuel tank.
7. Assemble components in
reverse order.

Exhaust System

Spark Arrestor Screen
Level 2.
Parts Required:
1. Remove spark plug lead and engine cover.
2. Place piston at Top Dead Center (TDC) to prevent carbon/dirt from
entering cylinder.
3. Remove spark arrestor screen
cover (C), gaskets (D), (E), and
screen (F), from muffler body.
4. Clean carbon deposits from
muffler components.
Note: When cleaning carbon
deposit, be careful not to
damage the catalytic
element inside muffler.
5. Replace screen if it is cracked,
plugged, or has holes burned
through.
6. Assemble components in
reverse order.
36
Spark Arrestor Screen, Gasket
PAS-225
F
E
D
X7732274303
© 01/2020 ECHO Incorporated
C