Lubrication - Echo PAS-225 Pro Attachment Series Manual

PAS-225
1. Check idle speed and reset if
necessary. If a tachometer is
available, idle speed screw (A)
should be set to the
specifications found on
"Specifications" page of this
manual. Turn idle screw (A)
clockwise to increase idle
speed; counterclockwise to
decrease idle speed.
When carburetor adjustment is completed, the cutting
attachment should not move at idle, otherwise serious personal
injury may result.

Lubrication

Level 1.
Parts Required:
Drive Shaft Upper
1. Loosen clamping knob (A)
2. Pull locater pin (B) and rotate ¼
turn counterclockwise to
lockout position.
3. Remove attachment.
X7732274303
© 01/2020 ECHO Incorporated
Lithium Based Grease.
MAINTENANCE
A
B
39