1. Manuals
  2. Brands
  3. Echo Manuals
  4. Trimmer
  5. Pro Attachment Series
  6. Operator's manual

Echo Pro Attachment Series Operator's Manual

Hide thumbs Also See for Pro Attachment Series:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
Operator's
PAS-225 / 225SB
Pro Attachment
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects,
or other reproductive harm.
Read and understand all provided literature before
use. Failure to do so could result in serious injury.
X7732274001
© 02/2019 ECHO Inc.
Manual
Series™

Advertisement

Table of Contents
loading

Related Manuals for Echo Pro Attachment Series

Summary of Contents for Echo Pro Attachment Series

  • Page 1 The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Read and understand all provided literature before use. Failure to do so could result in serious injury. X7732274001 © 02/2019 ECHO Inc.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Introduction ....................4 Servicing Information .................. 4 Parts/Serial Number................4 Service ....................5 ECHO Consumer Product Support ............5 Product Registration ................5 Additional Literature ................5 Safety ......................6 Manual Safety Symbols and Important Information ......6 International Symbols ................
  • Page 3 Storage ..................... 45 Long Term Storage (Over 30 Days) ..........45 PAS-225 SB Only: ................46 Storage Hook Installation ..............46 Specifications ................... 47 ECHO Optional Attachments............. 48 Product Registration ................. 48 Notes ......................50 X7732274001 © 02/2019 ECHO Inc.

  • Page 4: Introduction

    SERVICING INFORMATION Parts/Serial Number Genuine ECHO Parts and Assemblies for your ECHO products are available only from an Authorized ECHO Dealer. When you do need to buy parts always have the Model Number and Serial Number of the unit with you.

  • Page 5: Service

    Register your ECHO equipment on-line at www.echo-usa.com or by filling out the product registration sheet included in this manual. Registering your product confirms warranty coverage and provides a direct link to ECHO if we find it necessary to contact you.

  • Page 6: Safety

    Note: This enclosed message provides tips for use, care and maintenance of the unit. CIRCLE AND SLASH SYMBOL This symbol means the specific action shown is prohibited. Ignoring these prohibitions can result in serious or fatal injury. X7732274001 © 02/2019 ECHO Inc.

  • Page 7: International Symbols

    Keep Bystanders At Least 15 m (50 ft.) Away Beware Thrown Objects Wear Eye Protection Keep Bystanders and Helpers Away 15 m (50 ft.) DO NOT Allow Flames Ignition or Sparks Near Fuel ON / OFF X7732274001 © 02/2019 ECHO Inc.
  • Page 8 Do not operate closer DO NOT USE BLADES - than 15 m (50 ft.) from Line Head Only electrical hazards. Keep bystanders at least 15 m (50 ft.) away. Plan retreat path from falling objects. X7732274001 © 02/2019 ECHO Inc.

  • Page 9: Personal Condition And Safety Equipment

    Eye protection that meets ANSI Z87.1 or CE requirements ◆ must be worn whenever you operate the unit. For additional safety, a full-face shield may be worn over ◆ safety glasses or goggles to provide protection from sharp branches or flying debris. X7732274001 © 02/2019 ECHO Inc.
  • Page 10 Hearing/Ear Protection ECHO recommends wearing personal protection whenever unit is used. Breathing Protection Operators who are sensitive to dust or other common airborne allergens may need to wear a dust mask to prevent inhaling these materials while operating unit.
  • Page 11 To reduce the risk of serious or fatal injury, persons with pacemakers should consult with their physician and the pacemaker manufacturer before operating this machine. In the absence of such information, ECHO does not recommend the use of this machine by anyone who has a pacemaker.
  • Page 12 All over head electrical conductors and communications wires can have electricity flow with high voltages. This unit is not insulated against electrical current. Never touch wires directly or indirectly, otherwise serious injury or death may result. X7732274001 © 02/2019 ECHO Inc.
  • Page 13 Do not work in odd positions or on ladders. Do not overreach. Avoid Hot Surfaces • During operation, the drive shaft housing and attachment bearing housing may become very hot, too hot to touch. Avoid contact during and immediately after operation. X7732274001 © 02/2019 ECHO Inc.

  • Page 14: Equipment

    SAFETY PAS-225 Equipment Use only ECHO attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO.

  • Page 15: Emission Control (Exhaust & Evaporative)

    The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual. X7732274001 © 02/2019 ECHO Inc.

  • Page 16: Description

    Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. Safety label is for example only. Your label my appear slightly different.
  • Page 17 13. Top Guard 14. Spark Arrestor Muffler Or Spark Arrestor Muffler With Catalyst 15. Fuel Tank 16. Recoil Starter Handle 17. Fuel Tank Cap 18. Purge Bulb 19. Choke 20. Air Cleaner 21. Spark Plug X7732274001 © 02/2019 ECHO Inc.

  • Page 18: Contents

    Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. Power Head with Upper Drive Shaft Assembly...

  • Page 19: Operation

    Fuel Diesel fuels and alternative fuels, such as E-15 (15% ethanol), E -85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of diesel or alternative fuels may cause...
  • Page 20 2-stroke and 2/4-stroke hybrid engines. Two Stroke Oil - A two-stroke engine oil, such as ECHO branded 2-stroke oils, meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must be used. ECHO branded 2-stroke oils meet these standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L- EGD (ISO/CD 13738) and J.A.S.O.
  • Page 21 Add remaining gasoline, close fuel container, and remix. Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage. X7732274001 © 02/2019 ECHO Inc.

  • Page 22: Operation With Blades

    Follow installation instructions. Pro Maxi-Cut Metal Brush / Tri-Cut Grass/ Metal Grass / Grass/Weed Clearing Weed Blade Weed Blade Blade Blades Support Handle, with or U-Handle or Support Handle with U-handle* without Barrier Barrier Bar X7732274001 © 02/2019 ECHO Inc.

  • Page 23: Blade Selection

    An improper or dull blade can cause serious personal injury. Blades MUST be sharp. Dull blades increase the chance of kick-out and injury to yourself and bystanders. Never use an edging blade, circular saw blade, or any other type of unapproved blade. X7732274001 © 02/2019 ECHO Inc.
  • Page 24 (A) when unit is not in use. Keep blades in protective packaging until ready to install. Store blades safely after removal to prevent injury from accidental contact. Use blade protectors to protect blade teeth during unit transportation. X7732274001 © 02/2019 ECHO Inc.

  • Page 25: Starting Cold Engine

    Stop Switch Move stop switch button (A) forward, away from the STOP position. X7732274001 © 02/2019 ECHO Inc.

  • Page 26: Starting Warm Engine

    The starting procedure is the same as Cold Start except DO NOT close the choke, and do not hold throttle trigger fully depressed. The attachment should not move at idle, otherwise serious personal injury may result. X7732274001 © 02/2019 ECHO Inc.
  • Page 27 Firmly grip throttle handle and throttle trigger lockout with left hand. Rapidly pull recoil starter handle/rope (D) until engine fires. Note: If engine does not start after 5 pulls, use Cold Start Procedure. X7732274001 © 02/2019 ECHO Inc.

  • Page 28: Stopping Engine

    STOP position. If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using unit again. Applications Nylon line heads may be used for trimming, scything, edging, and scalping of grass and light weeds.

  • Page 29: Operating Techniques

    In both examples, the reactive force is in the opposite direction of blade rotation at the contact point where resistance occurs. X7732274001 © 02/2019 ECHO Inc.

  • Page 30: Blade Cutting Problems

    To prevent binding: • Keep blades sharp • Avoid excessive pressure during cuts • Don’t exceed cutting capacity of blade • Don’t use blades with damaged or missing cutting teeth • Don’t rock blades in cut X7732274001 © 02/2019 ECHO Inc.

  • Page 31: Maintenance

    Level 1 = Easy to do. Common tools may be required. Level 2 = Moderate difficulty. Some specialized tools may be required. Level 3 = See your dealer. Click HERE or go to http://www.echo-usa.com/products/maintenance-kit HERE https://www.shindaiwa-usa.com/you-can.aspx For information about maintenance kits.

  • Page 32: Maintenance Intervals

    2 Apply lithium based grease every 50 hours of use. 3 Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity. * Replacement is recommended based on the finding of damage or wear during inspection. X7732274001 © 02/2019 ECHO Inc.

  • Page 33: Air Filter

    • Soak heavily soiled filters in water/detergent solution to loosen dirt, then brush lightly. • Rinse with clean water and allow to dry completely before reuse. Install air filter in air filter case. Install air filter cover. X7732274001 © 02/2019 ECHO Inc.

  • Page 34: Fuel Filter

    2012 and later equipment, only fuel supply hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to $37,500.00 may be enforced for using an non-certified replacement part. X7732274001 © 02/2019 ECHO Inc.

  • Page 35: Spark Plug

    • Air intakes are blocked, preventing cooling air from reaching the cylinder. • Dust and grass build up on the outside of the cylinder. This build up insulates the engine and prevents the heat from leaving. X7732274001 © 02/2019 ECHO Inc.
  • Page 36 Remove air cleaner cover (A). Remove engine cover (B). DO NOT use a metal scraper to remove dirt from the cylinder fins. Use a brush to remove dirt from the cylinder fins. Remove ignition wires from clip for cleaning. X7732274001 © 02/2019 ECHO Inc.

  • Page 37: Exhaust System

    Clean carbon deposits from muffler components. Note: When cleaning carbon deposit, be careful not to damage the catalytic element inside muffler. Replace screen if it is cracked, plugged, or has holes burned through. Assemble components in reverse order. X7732274001 © 02/2019 ECHO Inc.
  • Page 38 Tighten muffler mounting bolts (or nuts) to 90-110 kgf•cm (80-95 in•lbf). Install engine cover and attach spark plug lead. Start engine, and warm to operating temperature. Stop engine, and re-tighten mounting bolts (or nuts) to specifications. X7732274001 © 02/2019 ECHO Inc.

  • Page 39: Carburetor Adjustment

    To maintain proper engine operation and emission compliance above 330 m (1100 ft.) ASL the carburetor may need to be adjusted by an authorized ECHO service dealer. If the engine is adjusted for operation above 330 m (1100 ft.) ASL, the carburetor must be re-adjusted when operating the engine below 330 m (1,100 ft.) ASL, otherwise severe engine damage may result.

  • Page 40: Lubrication

    Slide coupler on upper drive shaft until fully seated, and align set screw hole in coupling with hole in upper drive shaft. Install and tighten set screw (D), and tighten clamping screw (C). X7732274001 © 02/2019 ECHO Inc.

  • Page 41: Pas-225 Sb Only

    15 ml (0.5 oz.) of grease. Slide the flexible cable (D) back in the drive housing. DO NOT get dirt on the flex cable. Install the gear housing and shield assembly. X7732274001 © 02/2019 ECHO Inc.

  • Page 42: Nylon Line Head Disassembly Instructions

    A blade that is not balanced will cause unsafe handling due to vibration and can result in blade failure. File each tooth at a 30° angle a specific number of times, e.g., four strokes per tooth. Work your way around the blade until all teeth are sharp. X7732274001 © 02/2019 ECHO Inc.
  • Page 43 This will change the temper of the blade and could result in blade failure. After sharpening teeth, check each tooth radius for evidence of a square (sharp) corner. Use the round (rat tail) file to renew the radius. X7732274001 © 02/2019 ECHO Inc.

  • Page 44: Troubleshooting

    See your dealer problem - wire Interlock switch No spark Incorrect gap - Adjust to 0.65mm Covered with (0.026 in.) Spark at carbon - Fouled plug Clean or replace with fuel - Plug plug defective X7732274001 © 02/2019 ECHO Inc.

  • Page 45: Storage

    Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following: Store unit in a dry, dust free place, out of the reach of children. X7732274001 © 02/2019 ECHO Inc.

  • Page 46: Pas-225 Sb Only

    10. Install the spark plug. Connect the spark plug lead to the spark plug. PAS-225 SB Only: Storage Hook Installation Insert small end of hook into locating hole on attachment shaft. Slide plastic cap onto end of attachment shaft. X7732274001 © 02/2019 ECHO Inc.

  • Page 47: Specifications

    Nylon line head, Line capacity 6.0 m (20 ft.) Handles Front - Support, Rear Handle (with rubber) Shoulder Harness Optional Idle Speed 3,000 RPM Clutch Engagement Speed 3,850 RPM Wide Open Throttle Speed 10,000 RPM (W.O.T.) X7732274001 © 02/2019 ECHO Inc.

  • Page 48: Echo Optional Attachments

    Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Inc. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.
  • Page 49 PAS-225 PRODUCT REGISTRATION X7732274001 © 02/2019 ECHO Inc.

  • Page 50: Notes

    NOTES PAS-225 NOTES X7732274001 © 02/2019 ECHO Inc.
  • Page 51 PAS-225 NOTES X7732274001 © 02/2019 ECHO Inc.
  • Page 52 T99814001001 - T99814999999 S06400369501 - S06400999999 ECHO INCORPORATED 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.com...

This manual is also suitable for:

Pas-225sbPas-225

Table of Contents