Table of Contents
Advertisement
MAINTENANCE
5.
Remove grass and leaves from
the grid (C) between the recoil
starter and fuel tank.
6.
Assemble components in
reverse order.
Exhaust System
Spark Arrester Screen
Level 2.
Parts required: Spark Arrester Screen, Gasket.
1.
Remove spark plug lead.
2.
Remove muffler cover (A).
3.
Place piston at Top Dead
Center (TDC) to prevent carbon
or dirt from entering cylinder.
4.
Remove spark arrester screen
cover (B), gasket (C), and
screen (D), from muffler body.
5.
Clean carbon deposits from
muffler components.
Note: When cleaning carbon
deposit, be careful not to
damage the catalytic
element inside muffler.
6.
Replace screen if it is cracked, plugged, or has holes burned through.
7.
Assemble components in reverse order.
38
SRM-3020T
C
B
D
C
© 05/22 ECHO Incorporated
A
X7502350103
Advertisement
Table of Contents
