Table of Contents
Advertisement
BC0530 Service Manual
Installation: Assembly
Remove the ice machine front-cover panel, top-cover panel and side-cover panels from the ice machine frame.
The ice storage bin surface must be level. Use minimum 150 mm (6") ice storage bin leg adjusters, or seal
the bin directly to the floor using shims as required. Use an NSF certified sealant to seal the bin to the floor. If
there are gaps larger than 3 mm (1/8") install a cove molding around the bottom of the bin.
Note: The ice drop opening and the probe opening must NOT be blocked by the storage
CAUTION
bin walls.
Carefully lift the ice machine and position it on the ice storage bin.
The ice machine is heavy! Use of a mechanical lift may be required.
Attach the ice machine to the ice storage bin. The ice machine is supplied with an attachment bracket to
fit Scotsman B330 and B530 ice storage bins.
March 2020
Page 7
Advertisement
Table of Contents
