Scotsman BC0530 Service Manual page 24

BC0530 Service Manual
CODE: FAULT CODE INDICATES:
8 (Rev 1.3 only)
Machine is in Full-Rinse
Mode. (Left Jumper is
pulled, on Controller)
9 (Rev 1.3 only)
Ice Bin Full (A cold Bin
Probe will shut down the
icemaker right after the next
harvest is complete)
POSSIBLE CAUSE:
This is an optional mode, which is
not as energy efficient.
This is a normal condition,
indicating that the Bin is full. (Bin
Probe is cold!)
If Code 90 is indicated, but Bin is
not full, check for faulty Bin Probe,
bad wiring to Bin Probe or faulty
Controller Board.
March 2020
Page 24
SOLUTION:
Replace jumper to restore normal
energy efficient minimum-rinse
mode.
No action required.
Repair wiring, replace bin Probe, or
replace Controller.