Transporting - Bosch CM8S Operating/Safety Instructions Manual

2610051821.qxp_BM CM8S 9/19/18 2:55 PM Page 25
by the BULLET (•) symbol.
• Never lift this saw by grasping the base
extensions when they are in the extended
position.
• Unplug electric cord and wind up.
• Never lift the saw by gripping any of the
mechanism parts.
• To avoid back injury, hold the tool close to your
body when lifting.
• Never lift tool by holding switch handle.
• Never lift the miter saw by the power cord.
• Place the saw on a firm, level surface where
there is plenty of room for handling and
properly supporting the workpiece.
• ONLY lift this saw by the cast-in carry handles
at each side of the bottom of the base or top
carry handle.
▼ PREPARING TO LIFT THE SAW
▼ LIFT THE SAW BY THE TOP CARY HANDLE
▼ LIFT THE SAW BY THE CAST IN CARRY
HANDLES

Transporting

To avoid injury, follow all
statements identified below
FIG. 21
Slide Rail
Locked
Cast-In
Carrying
Handle
Extension
Locked
FIG. 22
25
Top Carrying
Handle
Cast-In
Carrying
Handle
Extension
Locked