Samsung MX-T70 User Manual page 15

Using the Stereo Group mode
You can enjoy the stereo sound by connecting two Party Audio systems.

1. Press the ADD STEREO button on the left Party Audio system. The "ADD STEREO" message
appears on the display and the LED blinks on the ADD STEREO button.
2. Press the ADD STEREO button on the right Party Audio system. The "ADD STEREO" message
appears on the display and the LED blinks on the ADD STEREO button.
3. When the connection has made, The "BT PAIRING" message appears on the master Party Audio
system and the "STEREO MODE" appears on the slave Party Audio system.
• The master Party Audio system output left channel sound and the slave Party Audio system
output right channel sound. If you want to change the sound channels of Party Audio systems,
press the ADD STEREO button on the current master Party Audio system.
4. Play music on the Party Audio. Sound output from both Party Audio systems.
NOTES
• To use the Stereo Group mode, both Party Audio systems must be the same model.
• It may cause malfunction due to environment or other device effect.
• If the red LED is on the ADD STEREO button, an error has occured in the Stereo Group connection.
Try step 1 and step 4 again.
• All the buttons except ADD STEREO button and Power button on the slave Party Audio systems are
not available while in Stereo Group mode.
• The GROUP PLAY button on the host Party Audio system is not available while in Stereo Group
mode.
ADD STEREO
Left Party Audio
(Master)
ENG - 9

ADD STEREO
Right Party Audio
(Slave)