Rear Panel Of The Party Audio - Samsung MX-T70 User Manual

Rear Panel of the Party Audio


Bluetooth PAIRING

ADD STEREO

GROUP PLAY

USB1

USB2

ECHO1

VOL1

MIC1
AUX2/GROUP

PLAY IN Terminals
GROUP PLAY OUT

Terminals

AUX1
 MIC2

VOL2

ECHO2

Power
 
PAIRING ADD STEREO
ECHO 1 VOL 1 MIC 1
   

Press the PAIRING button to enter the "BT PAIRING" mode.
Press the ADD STEREO button to connect to the another Party Audio wirelessly.
Press the GROUP PLAY button to connect to the up to ten Party Audio systems
wirelessly.
Connect a USB device to the USB1 or USB2 ports on the main unit.
If you connect your cell phone to the USB1 port, you can charge it.
• Press the (Source) button to select USB1 or USB2.
You can give an echo effect to the sound from the microphones (MIC1) by turning
the ECHO1.
Use the VOL1 knob on the main unit to adjust the volume of the microphone
(MIC1).
Connect your microphone to the MIC1 jack.
Use an Audio Cable (not supplied) to connect AUX2 (IN) terminals on the main unit
to Audio Out on an external analog output device.
Use an Audio Cable (not supplied) to connect GROUP PLAY (OUT) terminals on the
main unit to Audio In on an external analog output device.
Use an Audio (AUX) Cable (not supplied) to connect AUX1 jack on the main unit to
Audio Out on an external device.
Connect your microphone to the MIC2 jack.
Use the VOL2 knob on the main unit to adjust the volume of the microphone
(MIC2).
You can give an echo effect to the sound from the microphones (MIC2) by turning
the ECHO2.
Connect the power cord to the Power jack and connect the other end of the
power cord to a wall socket to supply electrical power to the Party Audio.
ENG - 4
 
USB1
(5V 2.1A)
GROUP PLAY
L L
IN OUT
R R
AUX 1
AUX 2 / GROUP PLAY MIC 2 VOL 2
    

USB2
(5V 0.5A)
ECHO 2