Samsung MX-T70 User Manual page 13

Connecting the wireless Group Play mode
You can connect up to ten Party Audio systems by wireless Group Play function.
1. Press the GROUP PLAY button on the Host Party Audio system. The "HOST" message appears on
the display of the host Party Audio and the LED blinks on the GROUP PLAY button.
2. Press the GROUP PLAY button on the 2nd Party Audio system (Slave 1). The "GROUP PLAY
CONNECTED" message appears on the display and the GROUP PLAY button on both systems
stops blinking.
3. Press the GROUP PLAY button on the 3rd Party Audio system (Slave 2). The "GROUP PLAY
CONNECTED" message appears on the display and the GROUP PLAY button on the system stops
blinking.
4. If you want to add more Party Audio systems, repeat step 3.
5. Play music on the Host Party Audio. Sound output from all the connected systems.
NOTES
• The wireless Group Play connection is available for any Party Audio system.
• It may cause malfunction due to environment or other device effect.
• If the red LED is on the GROUP PLAY button, an error has occurred in the wireless Group Play
connection. Try step 1 to step 5 again.
• The ADD STEREO button and
while in wireless Group Play mode.
• Press and hold GROUP PLAY button before Group play connected, this Party Audio system will be
Host immediately.
• The ADD STEREO button on the host Party Audio system is not available while in wireless Group
Play mode.


GROUP PLAY
GROUP PLAY
Slave 1
Host
PAIRING button on the slave Party Audio systems are not available
ENG - 7

GROUP PLAY
Slave 2