Samsung MX-T70 User Manual page 14

• All slave must be connected one by one. For example, after Host is connected, press GROUP PLAY
button in slave 1 to connect, and after slave 1 is connected, you should connect slave 2 and slave
3 one by one sequentially.
• While in Group Play connection, currently connected Bluetooth connection is disconnected and
Bluetooth connection is disabled.
• Bluetooth device can search and connect with the host Party Audio only. Slave Party Audio systems
cannot be searched or connected on the Bluetooth device.
• If you power off and then power on the Party Audio or select the source other than BT in Group Play
mode, the Group Play mode is disconnected.
• This product does not support aptX audio stream with Wireless Group Play mode.
Disconnecting the wireless Group Play mode
1. Press and hold the GROUP PLAY button over 5 seconds (Host or Slaves) after Group Play
connected or press the GROUP PLAY button (Host or Slaves) before Group Play connected.
• "OFF-GROUP PLAY" appears on the display and the LED above the GROUP PLAY button is off.
2. If you select the source other than BT or powered off on the host Party Audio, the Group Play
mode is disconnected.
• If the disconnection has made from the host Party Audio, all the Group Play connection is
disconnected.
LED Indications
LED STATE
Blink
Green
On
Red On
Waiting for a wireless Group Play connection.
The wireless Group Play connection has made.
An error occurs in the wireless Group Play connection.
ENG - 8
Description