Vsim Connectors For Upfitting (2015 - Newer) - Dodge Charger Pursuit 2011 Upfitter Manual

24 W540 20 BR/DG MIL Lamp ON - Sends out
Cavity Circuit
NOTE: Mating connector/pigtail 68251804AA

VSIM Connectors for Upfitting (2015 - Newer)

1 24-way C2 (White)
2 24-way C1 (Grey)
The VSIM upfitter connectors are located under the center console. The two 24-way connectors
are located close to the bottom of the instrument panel, while the 12-way connector is located next
to the mounting bolt for the console.
NOTE: There are sensors for the keyless entry system and antilock brake system located
under the console. Make sure during upfit that the sensors are not repositioned.
Sensor placement is critical for proper system operation.
NOTE: Do not remove the occupant restraint controller without first disconnecting the
battery and waiting two minutes. Follow information in TechCONNECT for disabling
restraint system. Failure to do so could cause airbag deployment.
Dodge Charger Pursuit Upfitter Guide
Function - Description
signal when MIL is on
3
3
Figure 10 VSIM Interface Connectors
HSD - 12V Digital output, low
Upfitter Requirements
current (Vbatt+0/-0.5 V / 500
mA)
1
2
12-way
L10_000
15