All occupant restraint system wiring must remain intact and may not be used for any other
Occupant Restraint System Wiring
purpose. This includes the driver and front passenger seat wiring. Any electrical connector that
is yellow is part of the occupant restraint system and should not be modified or used for other
purposes.
After any modification work is complete, confirm the occupant restraint system readiness as
Occupant Restraint System Verification
follows: turn the ignition key to the ON position. The airbag lamp in the instrument cluster
illuminates for 6 to 8 seconds, and then turns off. If the airbag lamp fails to illuminate, repeatedly
cycles on and off, or does not turn off, have the condition corrected by an authorized Chrysler LLC
dealership before shipping the vehicle to the customer.
50
Dodge Charger Pursuit Upfitter Guide