Dodge Charger Pursuit 2011 Upfitter Manual page 16

8 W516 18 BR/DB Headlamps ON - Sends signal
Cavity Circuit
9 W524 18 BR/LG
10 W553 18 BR/DG Stealth Mode Active - Sends
11 W532 22 BR/DG Upfitter Side CAN-IHS (+)
12 W534 22 BR/LG
13 W552 18 BR/WT Cluster Dimming Active Signal
14 W522 18 BR/VT
15 W523 18 BR/GY
16 Z910 18 BK
17 W745 21 DB/YL
18 K686 20 DB/WT VSIM Inline
19 W526 18 BR/DB Vehicle Speed Square Wave
20 W536 18 BR/YL
21 W537 18 BR/OR Panic Alarm Switch Mute
22 NC
23 W710 18 BR/DB Seat Belt Not Latched - Sends
14
Function - Description
out when headlights are on
Vehicle Speed Transmit - Sends
signal out when veh speed is
below 30 MPH
signal out when Stealth Mode
is active
Upfitter Side CAN-IHS (-)
Engine Running/Hour Meter -
Sends signal out when engine
is running
Driver Door Ajar - Sends out
signal when driver door is ajar
VSIM Inline Ground
(2017 Model Year) Secure
park signal - Sends signal out
when secure park is active
Signal - Frequency of signal is
proportional to vehicle speed
(5Hz per MPH)
Horn Switch Mute - Sends
request to vehicle body control
module to mute the horn
Signal - Sends request to
vehicle's body control module
to mute the alarm
out signal when driver seat
belt is not latched
HSD - 12V Digital output, low
Upfitter Requirements
current (Vbatt+0/-0.5 V / 500
mA)
HSD - 12V Digital output, low
current (Vbatt+0/-0.5 V / 250
mA)
HSD - 12V Digital output, low
current (Vbatt+0/-0.5 V / 500
mA)
CAN bus message output from
VSIM for upfitter use
CAN bus message output from
VSIM for upfitter use
N/A
HSD - 12V Digital output, low
current (Vbatt+0/-0.5 V / 500
mA)
HSD - 12V Digital output, low
current (Vbatt+0/-0.5 V / 1 A)
N/A
HSD - 12V Digital output, low
current (Vbatt+0/-0.5 V / 500
mA)
N/A
HSD - 12V pulse, low current
(50% duty cycle / 7 500 mA)
Active High Input to VSIM (Pull
down to GND/ 2.2 mA max)
Active High Input to VSIM (Pull
down to GND/ 2.2 mA max)
N/A
HSD - 12V Digital output, low
current (Vbatt+0/-0.5 V / 250
mA)
Dodge Charger Pursuit Upfitter Guide