Advertisement
Crib/Cot Setup
3
Crib/Cot
Top Rail
Base
Clamp
• Fit the mobile base on to the crib/cot top rail so that the
threaded peg extends outside of the crib/cot.
• Fit the clamp onto the threaded peg and turn the clamp
clockwise to secure the base to the crib/cot rail. Do not
over-tighten the clamp.
• If the distance between the mobile and the mattress is
less than 7 inches, lower the crib mattress.
Threaded Peg
7"
Dresser Top Setup
1
Loosen Screws
• Loosen the screws in the crib/cot adapter.
• Lift and remove the crib/cot adapter.
• Store the crib/cot adapter in a safe place for future
crib/cot use.
2
• Pull the knob on the arm out.
• Rotate the mobile portion of the arm down.
• Release the knob to lock the arm in position.
• Place the mobile on a dresser top out of reach of baby.
7
Crib/Cot Adapter
Battery Compartment Door
Knob
Advertisement
