Advertisement
1
Spoke
Hub
• Insert and "snap" the ends of the spokes into the slots in
the hub, as shown.
2
• Fit the end of a hanger into a hole in the hub.
• Insert a #4 x 1 cm screw into the hanger and tighten.
• Repeat this procedure to attach the other hangers.
Assembly
Slot
Hanger
3
Slot
Soft Toy String
• Fit a soft toy string into the slot in the end of a hanger.
• Pull down gently on the soft toy to secure the string in
the hanger.
• Repeat this procedure to attach the remaining soft toys to
the other two hangers.
4
Hub
• Insert and "snap" the arm into the hole in the side of
the hub.
5
Hanger
Arm
Advertisement
