Advertisement
We recommend using alkaline
batteries for longer battery life.
Mobile Base
• Loosen the screws in the battery compartment door
with a Phillips screwdriver. Remove the battery
compartment door. You may need to use the tip of the
screwdriver to lift the battery compartment door.
Hint: If the crib/cot adapter is attached to the base, loosen
the screws in the crib/cot adapter and remove it first.
• Insert four "D" (LR20) alkaline batteries.
• Replace the battery compartment door and tighten the
screws with a Phillips screwdriver. Do not over-tighten.
IMPORTANT! Under normal use conditions, the batteries
in the mobile will require replacement more often than the
batteries in the remote. When sounds or light become faint
or movement of the mobile is sluggish, it's time for an adult
to replace the batteries in the mobile base.
Battery Installation
1.5V x 2
"AA" (LR6)
1.5V x 4
"D" (LR20)
Remote
• Loosen the screw in the battery compartment door
with a Phillips screwdriver. Remove the battery
compartment door.
• Insert two "AA" (LR6) alkaline batteries, as indicated
inside the battery compartment.
• Replace the battery compartment door and tighten the
screw with a Phillips screwdriver. Do not over-tighten.
IMPORTANT! If the mobile does not respond to the remote,
it does not mean that the battery power in the remote is
low. Replace the batteries in the remote if the LED signal
indicator on the remote is dim when the button is pressed.
If the LED signal indicator does not light after installing
new batteries in the remote, check the orientation of the
batteries in the battery compartment to make sure they
are properly installed.
Protect the environment by not disposing of this
product with household waste (2002/96/EC). Check
your local authority for recycling advice and facilities.
3
Advertisement
