Mitel 6867i Configuration Manual page 9

REQUIRED FIELDS:
Name
Enter a name for the extension being created. Example: John Smith.
E-mail
Enter the e-mail address associated with this extension. This e-mail address will receive all
system notification messages. Example: john.smith@bicomsystems.com
Auto Provisioning
Set to Yes.
MAC Address
Enter Mitel phone MAC address. Example: 001565FF1536. MAC address can be found at
the back of the phone.
Click on the Save button.
Registering Phone
This chapter describes how to register Mitel phone using DHCP or TFTP.
The following topics are covered:
DHCP
TFTP
DHCP
Configure DHCP
Make sure your DHCP router is configured to use option 66 to automatically instruct phones
with the URL for auto provisioning. For more information refer to your router documentation
or contact your network administrator.
Phone first boot or user initiated reboot
Auto provisioning process will start during phone first boot or after reboot process has been
initiated by user. DHCP server will instruct the phone where from to pickup appropriate
configuration file. If everything is done as above described, you should have successfully
registered your phone to PBXware. Dial *123 to verify registration.
TFTP
Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
Enter username and password and press Confirm button. NOTE:
Factory default login