Disassembly Of Main Units; Top Unit - Canon PowerShot G2 Service Manual

2.3 Disassembly of Main Units

Be careful
not to drop.
SELF TIMER BUTTON
(1)-3
Position setting
NOTE (Assembling)
To re-assemble the DIAL/COVER UNIT and the B/W LCD UNIT, install them in the status that
the MAIN DIAL BRUSH, MODE DIAL BRUSH, MAIN DIAL and MODE DIAL are rotated in the
direction of the arrow as far as they can go.
Inside:
Outside: MAIN DIAL BRUSH

2.3.1 TOP UNIT

2.3.1.1 TOP UNIT
(1) DIAL/COVER UNIT, B/W LCD UNIT, SELF TIMER BUTTON
1. Remove the six screws.
2. Remove the B/W LCD UNIT from the DIAL/COVER UNIT.
3. Remove the SELF TIMER BUTTON.
t
n
(1)-1
(1)-1
n
(1)-1
(1)-2
Position setting
MODE DIAL BRUSH
Fig. 3-23 TOP UNIT
3-23
CHAPTER 3. REPAIR INSTRUCTION
n
(1)-1
B/W LCD UNIT
DIAL/COVER UNIT
Inside: MODE DIAL
Outside: MAIN DIAL