ALDI Stirling Black Edition MD 17329 Instruction Manual page 39

AFTER SALES SUPPORT
40
1300 884 987
AUS
Removing and fitting the presser foot
Removal
− Turn the hand wheel towards you until the needle has reached its
highest position.
− Lift the presser foot 26
highest position.
− The presser foot will drop out if you push the foot release lever
behind the presser foot holder.
Fitting
− Fit the presser foot so that the pin on the foot is directly under the
groove of the foot holder.
− Lower the presser foot lever. The sewing foot will automatically
click into place.
− Now push the sewing foot release lever upwards.
Removing and fitting the presser foot holder
The presser foot holder does not need to be removed unless you want
to darn or embroider or make space to clean the fabric feeder
Removal
− Move the needle to its highest position by turning the hand wheel
towards you and raise the presser foot lever.
− Remove the foot from the presser foot holder and, using the
screwdriver provided, undo the presser foot holder screw
Fitting
− Move the needle to its highest position by turning the hand wheel
towards you and raise the presser foot lever.
− When you attach the presser foot holder, push it upwards as far as
possible and, using the screwdriver provided, tighten the presser
foot holder screw.
by raising the presser foot lever
MODEL: MD 17329 PRODUCT CODE: 13651 05/2020
20
to the
22
25 .
27 .
www.medion.com.au