ALDI Stirling Black Edition MD 17329 Instruction Manual page 15

A
AFTER SALES SUPPORT
16
1300 884 987
AUS
B
3
2
1
2
− Now pass the thread through the tension spring and into the thread
hole. Make sure that around 15 cm of the thread is hanging out of
the bobbin.
Check that the bobbin is inserted correctly and that it
can be turned clockwise in the case.
Inserting the bobbin case
− Hold the bobbin case so that the finger (A) of the case is pointing
upwards.
− Open the rocking arm of the bobbin case.
− Put the bobbin case on the central pin and press the case in
carefully until the finger of the bobbin case stops in the recess (B)
in the shuttle track ring.
− Let go of the rocking arm and press it onto the bobbin case.
− Close the bobbin case cover.
Threading the upper thread
Please read the following instructions carefully as an incorrect
sequence or thread guiding can lead to broken threads, missed
stitches and gathered fabric.
1. Before threading the needle, raise the needle to its highest position
by turning the hand wheel
2. Raise the presser foot lever
in order to loosen the tension so that the upper thread can be
threaded without any problems.
3. Place a spool of thread on one of the spool holders
4. Now feed the thread through the upper thread guide
8 .
20 to the upper position (3) as well
MODEL: MD 17329 PRODUCT CODE: 13651 05/2020
5 .
2 .
www.medion.com.au