ALDI Stirling Black Edition MD 17329 Instruction Manual page 26

Stitch type settings
The program selection dial is used to set the stitch types. Make sure
that the needle is at its highest position before changing the stitch
type.
Always test the stitching on a swatch before using a stitch program for
your actual work.
All the stitch patterns are summarised in the table in
section "Program selection" on page 47.
Please read "Removing and fitting the presser foot" on
page 40 for instructions on attaching and removing
the presser foot.
Straight stitch
Suitable for general sewing and for top-stitching.
Presser foot: ..................................................................................................Standard foot
Program: ................................................................................................................... A and B
Stitch length: ................................................................................................................0 to 4
NOTICE!
Risk of damage!
The wrong pivot point can cause damage when using
a twin needle.
 In this case, set the needle high in the pivot point.
Zigzag stitch
The zigzag stitch is one of the most commonly used stitches. It can be
used for many different things, for example hemming, appliqué, and
monograms.
Before you use the zigzag stitch, sew a few straight stitches to
reinforce the stitching.
Presser foot: ..................................................................................................Standard foot
Program: ............................................................................................................................... C
Stitch width: .................................................................................................................1 to 4
Stitch length: ................................................................................................................1 to 4
There are five different stitch widths between programs B and C which
are only available on the zigzag stitch setting.
− Slowly turn the program selection dial on from program B in order
to select a different stitch width.
TIPS FOR ZIGZAG STITCHES
For a better zigzag stitch, the upper thread tension must be
lower than for straight stitches.
The upper thread should be slightly visible on the underside
of the fabric.
AFTER SALES SUPPORT
www.medion.com.au
27
1300 884 987 MODEL: MD 17329 PRODUCT CODE: 13651 05/2020
AUS