Table of Contents
Advertisement
Press the
or
The unit tunes into the next receivable
station.
You can also tune into stations manual-
ly.
Press the
or
Note:
You can only tune into stations manual-
ly if the RDS function is first deactivat-
ed.
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its so-called "broadcasting
network".
Press the
or
move to the next station on the
broadcasting network.
Note:
If you want to use this feature, the RDS
function must first be activated.
You will then only be able to switch to
stations that you have received once
already. Use the Travelstore function or
SCAN function with this feature.
You can configure the radio to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
Press the MENU button 8.
38
button :.
button :.
button : to
Keep pressing the
til "SENS" appears in the display.
button :.
Press the
The display shows the currently set val-
ue for sensitivity. "SENS HI6" means that
the tuner is highly sensitive. "SENS LO1"
means it is set to the lowest sensitivity
setting. If "SENS LO" is selected, "lo"
lights up in the display.
Set the required sensitivity using
the
and
When you have finished making
your changes, press the MENU 8
or OK ; button.
Select the required memory, i.e.
FM1, FM2, FMT or one of the fre-
quency ranges MW or LW.
Tune into the required station.
Press one of the station buttons 1 -
6 > for longer than two seconds
to store the station to that button.
You can automatically store the six sta-
tions with the strongest reception in the
region (only FM). The stations are stored
in the FMT memory.
Note:
Stations that were previously stored in
this memory are deleted in the process.
Keep the BND / TS button 5
pressed for longer than two sec-
onds.
: button un-
buttons :.
Advertisement
Table of Contents
