Table of Contents
Advertisement
This unit is equipped with an RDS radio
receiver. Many of the receivable FM sta-
tions transmit a signal that not only car-
ries the programme but also additional
information such as the station name
and programme type (PTY).
The station name appears in the dis-
play as soon as it is received.
If you are in CD, CD changer or AUX
mode:
Press the BND/ TS button 5.
The RDS functions - AF (Alternative
Frequency) and REG (Regional) - ex-
tend your radio's range of functions.
AF: If this RDS function is activat-
ed, the unit automatically tunes into
the best receivable frequency for
the station that is currently set.
REG: At certain times, some radio
stations divide their programme
into regional programmes providing
different regional content. You can
use the REG function to prevent
the car radio from switching to al-
ternative frequencies that are
transmitting different programme
content.
Note:
REG must be separately activated/de-
activated in the unit's menu.
Press the MENU button 8.
Keep pressing the
til "REG" followed by "ON" or "OFF"
appears in the display.
To switch REG on/off, press the
button :.
or
Press the MENU 8 or OK ; but-
ton.
To use the RDS functions (AF and
REG), press the RDS button 4.
The RDS functions are active when
"RDS" lights up in the display with a sym-
bol. When the RDS functions are
switched on, "REG ON" or "REG OFF"
appears briefly in the display.
This unit can receive programmes
broadcast over the FM, MW and LW
(AM) frequency ranges. There are three
preset memory levels for the FM range
and one for each of the MW and LW
ranges.
Six stations can be stored on each
memory level.
Briefly press the BND/ TS button
5 to switch between the memory
levels and frequency ranges.
There are various methods available for
tuning into a station.
button : un-
37
Advertisement
Table of Contents
