TP-Link Archer XR500v User Manual page 73

Chapter 11
¾ To enable or disable the wireless function:
Enable the 2.4 GHz or 5GHz Wireless Network. If you don't want to use the wireless
function, just deselect the box. If you disable the wireless function, all the wireless
settings won't be effective.
¾ To change the wireless network name (SSID) and wireless password:
Enter a new SSID using up to 32 characters. The value is case-sensitive.
Note:
If you use a wireless device to change the wireless settings, you will be disconnected after the new settings are effective.
Please write down the new SSID and password for future use.
¾ To hide SSID:
Select Hide SSID, and your SSID will not be broadcast. Your SSID won't display on your
wireless device when you scan for local wireless network list and you need to manually
join the network.
¾ To change the mode or channel:
Go to Advanced > Wireless
2.4GHz or 5GHz.
Mode: Select the desired mode.
• 802.11n only: Select only if all of your wireless clients are 802.11n devices.
• 802.11g/n mixed: Select if you are using both 802.11g and 802.11n wireless clients.
• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless
clients.
Note: When 802.11n only mode is selected, only 802.11n wireless stations can connect to the router. It is strongly
recommended that you select 802.11bgn mixed, and all of 802.11b, 802.11g, and 802.11n wireless stations can
connect to the router.
• 802.11ac/n mixed (5GHz): Select if you are using both 802.11ac and 802.11n wireless
clients.
> Wireless Settings page and select the wireless network
Specify Your Network Settings
69