TP-Link Archer XR500v User Manual page 80

Chapter 11
How can I
do that?
company's server is achieved. To surf the internet and visit my
company's network at the same time, I need to configure the
static routing.
LAN: 192.168.1.1
1 Make sure the routers use different LAN IP addresses on the
same subnet. Disable Router 2's DHCP function.
2 Visit http://tplinkmodem.net, and log in with the password
you set for the router.
3 Go to Advanced
current WAN Interface
4 Click Add to add a new static routing entry. Finish the settings
according to the following explanations:
Specify Your Network Settings
router
Router 2
WAN: 172.30.30.100
LAN: 192.168.1.2
Switch
My PC
192.168.1.100
> Network > Static
and click Save.
Company's server
172.30.30.1
Routing. Select your
76