Bringing Your Stack Online; Warranty - Cisco Meraki MS225 Series Installation Manual

Switch

Bringing your Stack Online

The MS210 and MS225 series switches additionally support cross-model stacking, meaning an MS210 can be stacked
with an MS225 and vice-versa.
MS225 switches can be connected in a physical stack using dedicated stacking ports and cables. Configuration steps
and additional information about stacking can be found here.
Reference https://documentation.meraki.com/MS
If you are still experiencing hardware issues, please contact Cisco Meraki support by logging in to dashboard and using
the Help option near the top of the page, then opening and email case or calling using the contact information on that
page.

Warranty

MS Warranty coverage periods are as follows:
Time
Period
MS225 Lifetime
MS
1 Year
Accessories
Note: The above table is a general guideline for warranty terms and is not final. Warranty terms are subject to printed
warranty information on the relevant online Meraki data sheets.
If your Cisco Meraki device fails and the problem cannot be resolved by troubleshooting, contact support to address the
issue. Once support determines that the device is in a failed state, they can process an RMA and send out a
replacement device free of charge. In most circumstances, the RMA will include a pre-paid shipping label so the faulty
equipment can be returned.
In order to initiate a hardware replacement for non-functioning hardware that is under warranty, you must have access to
the original packaging the hardware was shipped in. The original hardware packaging includes device serial number and
order information, and may be required for return shipping.
for additional information and troubleshooting tips.
Comments
The following are considered accessories:
SFP Modules, twinax/SFP+ cables, stacking cables, all mounting kits and stands,
antennas, interface modules, additional power cords, PoE injectors
14