Denon AVR-1312 Getting Started page 13

TÜRKÇE POLSKI
Distance
(Continued)
Default settings are underlined.
3
ui
Use to select a speaker, and use
o p to select distance.
Front L / Front R / Center / Subwoofer /
Surround L / Surround R / Surround Back Lz /
Surround Back Rz
Select the speaker.
z When the "Speaker Config." – "Surround
Back" (vpage 6) setting is
to "None", "Surround Back L" and
"Surround Back R" is not displayed.
• 0.00m – 18.00m : Set the distance.
• The speakers that can be selected differ
depending on the "Speaker Config."
(vpage 5) settings.
• Default settings :
Front L / Front R / Center / Subwoofer : 3.6 m
Surround L / Surround R /
Surround Back L / Surround Back R : 3.0 m
• Set the difference in the distance between the
speakers to less than 6.0 m.
NOTE
Speakers set to "None" in "Speaker Config."
(vpage 5) are not displayed.
4
ENTER
Press to enter the setting.
Speaker Setup
Speaker Config. Step
Bass Setting Front L/R
Distance Center
Channel Level Subwoofer
Crossover Freq. Surround L/R
[ENTER] Enter [ ] Return
SVENSKA SVENSKA NEDErlANDS NEDErlANDS
РУССКИЙ
Channel Level
1
ui
Use to select "Channel Level",
and then press ENTER .
Speaker Setup
Speaker Config. Test Tone Start
Bass Setting Default
Distance
Channel Level
Crossover Freq.
set
[ENTER] Enter [ ]
Channel Level
1
Test Tone Start
Default
2
ENTER
Press .
Output test tone.
[ENTER] Enter [ ]
Channel Level
1
Front L 0.0dB
Center 0.0dB
Front R 0.0dB
Surround R 0.0dB
Surround L 0.0dB
Subwoofer 0.0dB
[ENTER] Enter [ ]
ESpAñol ESpAñol itAliANo itAliANo
3
ui
Use to select a speaker, and use
o p to adjust the sound volume of
each speaker to be equal.
Front L / Center / Front R / Surround R /
Surround Back Rz / Surround Back Lz /
Surround L / Subwoofer
Select the speaker.
z When the "Speaker Config." – "Surround
Back" (vpage 6)
to "None", "Surround Back L" and
Return
"Surround Back R" is not displayed.
• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.
• When o is pressed while the subwoofer volume
is set to "–12 dB", the "Subwoofer" setting
switches to "OFF".
• When "Channel Level" is adjusted, the adjusted
values are set for all the surround modes. To
adjust the channel level separately for the
different surround modes, use the operation
see vm page 28 "Adjusting the volume of
Return
the speakers".
NOTE
• Speakers set to "None" in the "Speaker Config."
(vpage 6) settings are not displayed.
• When a headphones jack is inserted in the
PHONES jack of this unit, the "Channel Level"
is not displayed.
The "Channel Level" settings are
Return
Default
returned to the default settings.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.
FrANçAiS FrANçAiS DEutSch DEutSch
Default settings are underlined.
4
ENTER
Press to enter the setting.
Channel Level
1
Test Tone Start
Default
5
Press RETURN B
setting is set
[ENTER] Enter
Speaker Setup
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
[ENTER] Enter
ENGliSh ENGliSh
.
[ ] Return
Test Tone Start
Default
[ ] Return
7 7