Scan Tool Data; Scan Tool Data Definitions; Vehicle Speed (Km/H, Mph); Center Diff Lock Sw (On / Off) - Suzuki GRAND VITARA JB416 Service Manual

Scan Tool Data

Scan Tool Data
Vehicle speed At vehicle stop
Transfer shifted to 4H position
Transfer being shifted between 4H-lock and 4H position
Transfer shifted to 4H-lock position
Actuator Pos Sen Transfer being shifted between 4H and N position
Transfer shifted to 4L-lock position
Transfer being shifted between N and 4L-lock position
Transfer shifted to N position
Transfer shifted to 4H position
Transfer shifted to 4H-lock position
Actuator motor Pos
Transfer shifted to 4L-lock position
Transfer shifted to N position
Battery voltage Ignition switch ON and engine stop
Transfer shifted to 4L-lock or N position
4L/N switch
Transfer shifted to 4H or 4H-lock position
Transfer shifted to 4H or N position
Center diff lock SW
Transfer shifted to 4H-lock or 4L-lock position
A/T shifted to "N" range
N range signal (AT)
A/T shifted to other than "N" range
Clutch pedal depressed
CPP switch (MT)
Clutch pedal released
Transfer switch selected to N position
Mode switch 1
Transfer switch selected to 4H, 4H-lock or 4L-lock position
Transfer switch selected to 4H, 4H-lock or N position
Mode switch 2
Transfer switch selected to 4L-lock position
Transfer switch selected to 4H-lock or 4L-lock position
Mode switch 3
Transfer switch selected to 4H or N position
Buzzer not being sound
Transfer shifted to N Position
Warning buzzer
Transfer shifted to disagreement of transfer switch and transfer
position
ABS operating
ABS active
ABS not operating
ESP® operating
ESP® active
ESP® not operating

Scan Tool Data Definitions

Vehicle Speed (KM/H, MPH):

This parameter indicates vehicle speed calculated
by 4WD control module.
Actuator Pos Sen (Transfer shift actuator motor
position switch) (4H / 4H-lock / 4L-lock / N / 4H-
lock-4H / 4H-N / N-4L-lock):
This parameter indicates transfer shift actuator
motor position switch status detected by 4WD
control module.
Actuator motor Pos (Transfer shift actuator motor
position) (4H / 4H-lock / 4L-lock / N):
This parameter indicates transfer shift actuator
motor position detected by 4WD control module
using transfer shift actuator motor position.
Battery voltage (V):
This parameter indicates battery voltage detected by
4WD control module.
Transfer: Motor-Shift Type (Transfer with Shift Actuator) 3C-22
Vehicle Condition
4L / N switch (ON / OFF):
S5JB0E3314010
This parameter indicates 4L / N switch status
detected by 4WD control module.

Center diff lock Sw (ON / OFF):

This parameter indicates center differential lock
switch status detected by 4WD control module.
N range signal (AT) (ON / OFF):
This parameter indicates A/T shift position ("N" range
or not) detected by 4WD control module.
CPP switch (Clutch pedal position switch) (MT) (ON /
OFF):
This parameter indicates clutch pedal position switch
status detected by 4WD control module using CPP
switch.
Mode switch 1 (Transfer switch) (ON / OFF):
ON: Transfer switch to N position.
OFF: Transfer switch to other than N position.
Mode switch 2 (Transfer switch) (ON / OFF):
ON: Transfer switch to other than 4L-lock position.
OFF: Transfer switch to 4L-lock position.
S5JB0E3314009
Normal Condition /
Reference Value
0 km/h, 0 mph
4H
4H-lock – 4H
4H-lock
4H – N
4L-lock
N – 4L-lock
N
4H
4H-lock
4L-lock
N
10 – 14 V
ON
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
ON
OFF
ON
OFF
OFF
N Pos
Error
ON
OFF
ON
OFF