Chapter 6 >> Setting Channels; Scanning Analog Channels Automatically - JVC LT-32DH8ZG Instructions Manual

Chapter 6 >> Setting Channels

Scanning Analog Channels Automatically

> I n s t a l l a t i o n
Countr y
Auto Search
Manual Search
Edit Channels
Move Enter
> > A u t o S e a r c h
Search
Analog Channel Found
Scan Progress (AT V ) 80%
Stop
English-2
You can automatically scan channels for the frequency ranges available
(availability depends on your region).
Analog channels can be scanned only in Analog TV input mode. Please make
sure the main Input is set to Analog TV using the AV button.
France

Press the MENU button.
2
Select Installation using the ▲/▼ button and press the OK or ► button.

Select Country using the ▲/▼ button.

Select the country where you are now located using the ◄/► button.

Select Auto Search using the ▲/▼ button and press the OK or ► button.
Search is highlighted.

Press the OK button to start to scan channels.It starts to scan channels.
30
The scanned channels are automatically saved in order. To stop scanning
channels, press the BACK button.
7
After the channel scanning completes, the Edit Channels menu is displayed
automatically. The fi rst scanned channel, if only, will be automatically
displayed.
Note: In Germany, you can view the Antenna Power menu. If you connect an
active antenna to the TV, you have to set the Antenna Power to On to supply
the 5V power into antenna. The default value is Off. Active antenna is a portable
or indoor antenna which needs power supply from the product because it does
not have power cord for itself.