HP XW9400 Hardware Setup Manual page 26

TIP If the DKU has already been installed on the workstation, you can access
its contents in the /usr/discreet/DKU directory, without having to use the
application DVD.
4 Run the AJAfw_update utility to scan the AJA current firmware and, if
required, update to the latest firmware version. Type:
./AJAfw_update
The script checks the firmware of your AJA board, and one of the following
events occurs:
NOTE For more details about the AJA firmware procedures, consult the
README file located in the current directory.
5 Start the firmware update by typing Y and then pressing Enter.
While the AJA board's firmware and drivers are being updated, your
workstation appears to be frozen and your mouse and keyboard do not
work. This is normal and indicates that the firmware is being updated.
Once the firmware update is complete, you are returned to the terminal.
6 When you are returned to the terminal, return to the root directory and
eject the DVD by typing:
cd /
eject /mnt/cdrom
7 Shut down your workstation by typing:
shutdown -g0
If your workstation does not prompt you to power down, press the power
button for 10 seconds to force a power down.
8 Disconnect the power cord.
9 Wait 10 seconds, reconnect the power cord, then restart your workstation.
18 | Chapter 2 Getting Started
The script detects that the firmware and drivers need to be updated
and prompts you to start the update. In this case, continue to the
next step of this procedure.
The script indicates that the firmware is up-to-date and exits. In this
case, you are finished; go to step 6 of this procedure to eject the DVD.