Dimensions/Weights - Trane EXWA Installation Manual

Table 1: Unit weights
Shipping
Size Weight
with pallet (lb)
024 163
036 183
042 203
048 214
060 244
072 277
240 1222
Figure 1: Mechanical clearances
6

Dimensions/Weights/

Clearance
Shipping
Weight
w/o pallet (lb)
153
173
193
204
234
267
1156
WARNING
Improper Unit Lift!
Test lift unit approximately 24 inches to verify proper
center of gravity lift point. To avoid dropping of unit,
reposition lifting point if unit is not level. Failure to
properly lift unit could result in death or serious injury
or possible equipment or property-only damage.
Unit Location and Clearances
Locate the unit in an indoor area. The
ambient temperature surrounding the
unit must not be less than 45°F. Do
not locate the unit in areas subject to
freezing.
Attention should be given to service
clearance and technician safety. The
unit access panels may be easily re-
moved. There must be enough space
for service personnel to perform main-
tenance or repair. Provide sufficient
room to make water, and electrical
connection(s). Local and national
codes should be followed in providing
electrical power connections. See Fig-
ure 1 for mechanical clearances.
WSHP-SVX02A-EN