Canon imageRUNNER ADVANCE C2030 Series Manual page 6

[Models other than imageRUNNER ADVANCE C2030/C2020 Series]
NOTE:
Hook the [A] part of the Connecting Fixture on the plate [B] on the host machine side,
aligning with the boss at installation.
6) Install the Cassette 2 and 3.
7) Close the Cassette Right Lower Cover.
[A] [B]
F-1-16
8) Remove the Connector Cover of the host machine. (The removed Connector Cover will not
be used.)
• 1 W Sems Screw (The removed screw will be used in step 11.)
NOTE:
If a Protection Dummy Connector is attached to the AC Power Supply
Connector on the host machine side, remove the Dummy Connector before
connecting the AC Harness Connector from the Cassette Pedestal.
(The removed Dummy Connector will not be used.)
7
F-1-17
F-1-18
7