Canon imageRUNNER ADVANCE C2030 Series Manual page 14

■ Leading Edge Margin Adjustment (1st side)
NOTE:
By executing the leading edge margin adjustment for the Cassette 1, the adjustment is
applied to all source of paper.
Execute printing from the Cassette 1, and check that the leading edge margin is within L1=2.5
+/- 1.5mm.
If it is not within the range, execute adjustment by following the procedure below.
Feeding direction
of paper
1) Adjust the image position in service mode.
Service mode (Level 1) > COPIER > ADJUST > FEED-ADJ > REGIST
NOTE:
<Setting Range>
-128 to 127 (0.1mm per unit)
As the value is incremented by 1, the leading edge margin is decreased by 0.1mm.
2) Execute duplex printing from the Cassette 1, and check that the left edge margin is within
L1=2.5 +/- 1.5mm.
3) When the setting value was changed in step 1), write down the new numerical value in the
service label.
4) Exit from the service mode.
L1
image
F-1-38
15
15