Table of Contents
Advertisement
Chapter 2. Hardware Installation
The TD-8810/TD-8810B maintains three separate interfaces, one Ethernet, one ADSL and one
power adapter inerface.
The Router should not be located where it will be exposed to moisture or excessive heat.
Place the Router in a location where it can be safely connected to the various devices as well as
to a power source.
2.1 System requirement
Confirm your computer has been installed with networking interface card (NIC) before connecting
ADSL ROUTER to your computer, with operating system supporting the TCP/IP protocol.
2.1.1
LED explanation
The front panel of ADSL ROUTER includes one power indicator (RED) and seven function
indicators (GREEN), as explained in chart below:
Indicator
Description
PWR
Power
ADSL
ADSL status
ALARM
Mistake
ACT
Data
LAN
Ethernet
2.2 Rear-panel
ON/OFF: Turn on/off the ADSL ROUTER's power.
Power (9VAC/0.8A input): Please do not use any unknown power adaptor, otherwise your
ADSL ROUTER may be damaged.
RESET(reset default): First press the reset button of ROUTER, then turn on the ROUTER's
TD-8810
Status
On
Power OK
Off
Power fail
Slow flash
Self-detecting when power up
Quick flash
Connecting to the telecom network
On
Connection to telecom network OK
There is mistake when ADSL transmitting data
On
or receiving data
Off
ADSL normal
There is data transmitting or receiving on WAN
On
port
Off
No data transmitting or receiving on WAN port
On
LAN port normal
Off
Connection on LAN port abnormal
Flash
Data transmitting or receiving on LAN port
4
External ADSL Router User Guide
Function Details
Advertisement
Table of Contents
