Table of Contents
Advertisement
MAC Address - The physical address of the router, as seen from the LAN. The value can't
be changed.
IP Address - Enter the IP address of your router in dotted-decimal notation (factory default:
192.168.1.1).
Subnet Mask - An address code that determines the size of the network. Normally use
255.255.255.0 as the subnet mask.
Note:
a.
If you change the IP Address of LAN, you must use the new IP Address to login the router.
b.
If the new LAN IP Address you set is not in the same subnet, the IP Address pool of the
DHCP server will not take effect, until they are re-configured.
c.
If the new LAN IP Address you set is not in the same subnet, the Virtual Server and DMZ
Host will change accordingly at the same time.
4.5.2 WAN
You can configure the WAN port parameters on this page.
First, please choose the WAN Connection Type (Dynamic IP/Static IP/PPPoE) for the Internet.
The default type is Dynamic IP. If you aren't given any login parameters (fixed IP Address,
logging ID, etc), please select Dynamic IP. If you are given a fixed IP (static IP), please select
Static IP. If you are given a user name and a password, please select the type of your ISP
provided (PPPoE)
If you are not sure which connection type you use currently, please contact
.
your ISP to obtain the correct information.
1.
If you choose Dynamic IP, the router will automatically get IP parameters from your ISP.
You can see the page as follows (Figure 4-5):
Figure 4-4 LAN
16
Hide quick links:
Advertisement
Table of Contents
