NCR 7705 Kit Instructions
Safe door replacement keys
Hide thumbs
Also See for 7705:
- Kit instructions (50 pages) ,
- Operator's manual (127 pages) ,
- Hardware installation manual (120 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7705
Summary of Contents for NCR 7705
- Page 1 Kit Instructions 7705 Safe Door Replacement Keys 7705-K021 Issue A...
-
Page 2: Revision Record
NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current. -
Page 3: Kit Contents
7705 Safe Door Replacement Key Introduction This kit provides components to change Operating Keys (safe door keys) of a 7705 Safe that uses a LA GARD 2270 Key Lock. There are three keys required to change safe door keys: • Operating Key - keys used to open and close the Safe Door for normal kiosk operation •... - Page 4 7705 Safe Door Replacement Key Changing Operating Keys To set up or change operating keys, perform the steps below. Open the Safe Door. 2. Insert the Setup Key included in this kit (or current Operating Key) into the lock. 3. Slowly turn the Setup Key to the right (clockwise) until the Key Index is aligned with the Escutcheon Index.
- Page 5 7705 Safe Door Replacement Key 4. On the back of the Key Lock, insert the Change Key into the change key hole. Note: If the Change Key does not go in easily, then the wheels are not aligned. Turn the Setup Key to the left (counterclockwise) until it stops, and repeat steps 3 and 4.
- Page 6 7705 Safe Door Replacement Key 7. Insert the new Operating Key included in this kit into the lock. 8. Slowly turn the new Operating Key to the right until it stops, and the Key Index is aligned with the Escutcheon Index.
- Page 7 7705 Safe Door Replacement Key Opening the 7705 Safe 1. Open the 7705 Front Door. Insert and turn the key backward (counterclockwise when viewing the front side of the lock). 2. Unlock and open the Safe Door. a. Insert the current Operating Key into the lock b.
- Page 8 7705 Safe Door Replacement Key Closing the 7705 Safe 1. Close the Safe Door and turn the Door Handle to the right (clockwise) to fasten the Safe Door Bolts. 2. Turn the safe key to the left (counterclockwise) to fasten the Key Lock Bolt and lock the safe door.